English 
한국어
■CONTACTOR DATA
|
Model |
BZJ-200G/□ |
BZJ-200G/B□ |
|
|
Contact Form |
1D (SPST-NC) |
||
|
Contact Material |
Ag Alloy |
||
|
Contact Rating(at Resistive Load) |
200A×48VDC（DC-1） |
200A×72VDC（DC-1） |
|
|
Contact Voltage Drop |
≤80mV@200A |
||
|
Insulation Resistance |
Min. 100MΩ at 500VDC |
||
|
Dielectric Strength (Between Insulated Electric Parts) |
1000VAC 50 HZ/60 HZ (1 minute) Leak current<1mA |
||
|
Pick up time |
Max. 30mSec. |
||
|
Drop out time |
Max. 30mSec. |
||
|
Mechanical Endurance |
100,000 Operations (no load) |
||
|
Electrical Endurance |
6,000 Operations (at rated load) |
||
|
Working Duty |
Continuous |
||
■COIL DATA
|
Model |
Coil voltage(V) |
Coil Working volt.（V） |
Pick-up Volt.（V） |
Drop-out Volt.（V） |
Starting current（A） |
Maintain current（A） |
|
BZJ-200G |
12 |
0.85US～1.1US |
≤70% |
≥10% |
≤10 |
≤0.9 |
|
24 |
≤5 |
≤0.4 |
||||
|
48 |
≤5 |
≤0.15 |
||||
|
60 |
≤4 |
≤0.15 |
■Part Numbering System
■Shape installation and circuit diagram
BZJ-200G unit (mm)
|
Dimension（mm） |
Tolerance grade not noted（mm） |
|
0～30 |
±0.3 |
|
31～60 |
±0.5 |
|
61～100 |
±1 |
|
＞100 |
±2 |
Remarks
- While assemble contactor, tighten torque of nut of terminal screw in main circuit is 8～10N.m；tighten torque of nut of terminal screw in control circuit is 1～1.5N.m。
- Driving circuit power for coil must be no less than coil power; otherwise, it will reduce cutting capacity of product.
- Continuous applied voltage should not exceed the maximum permission voltage. Otherwise, abnormal heating of coil will shorten the life of insulating coating.
- This contactor is non-waterproof, please don’t use in water, solvent, oil and other environment that may contact with the shell or terminal. Otherwise, it may cause abnormal heating due to the burn-in of shell or corrosion, dirty of terminal.
